Crown
robert_ramirez16
AI ile Benzer Model Bul
Baskı Profili(0)
Model Dosyası(0)
0
1
0
Yayınlandı:2026-06-01 07:10:22
0
0
010Açıklama
Etiketler
Model Kaynağı
Yorumlar(0)
🧩 Description
An intricately modeled decorative crown designed to evoke regality and elegance — perfect for royal-themed statues, displays, cosplay props, or tabletop scenes (scale as needed).
The model includes a central M8 screw socket on the bottom interior so you can securely mount the crown to a stand, statue, or headband.
🎯 Purpose
Ideal for display pieces, photo props, or role-playing/cosplay after scaling. For wearable use, scale to head circumference and test-fit with a low-quality draft before final print.
🖨️ Printing Orientation & Tips
Orientation: Print base-down (upright) for best detail fidelity and tip sharpness.
Supports: Use internal supports only (block supports on the outside surfaces; allow supports inside the cavity to preserve exterior finish). Tree/organic supports work well.
Brim: Add a brim if you see any warping or if contact area is small.
Detail filaments: Gold/metallic PLA or silk filaments enhance the regal look. For painting, use neutral PLA and finish with metallic spray or rub-on wax.
Scaling: For props, start at 100%; for miniatures, 50–70%; for full cosplay, 105–115% depending on padding and hairstyle.
Test the M8 socket fit at draft scale if you plan to mount the crown with a screw or stud.
🛠️ Recommended Settings
Layer height: 0.12–0.16 mm (fine detail); 0.20 mm is acceptable for faster prints
Walls / perimeters: 3 (use 4 if you want stiffer tips)
Infill: 10–15% (Gyroid or Grid) — mostly decorative; increase if you need a heavier feel
Supports: Internal only (enforcers inside / blockers outside)
Brim: Optional (use if needed for adhesion or tall, slender variants)
Filament: PLA (indoor display, best surface) or PETG/ASA (added toughness/UV resistance for events/outdoors)
Adhesion: PEI smooth or textured sheet with glue stick or another adhesion aid recommended
🔧 Assembly / Mounting
No assembly required — single-piece print.
Mounting point: M8 screw socket centered on the bottom interior; use an M8 screw/stud or insert for firm attachment to a stand, mannequin, or prop rig.
For wearable rigs, you can attach a thin headband or interior pad to the M8 point or use hook-and-loop tape around the rim.
📝 Notes
This is a decorative prop — not protective equipment or a toy for unsupervised children.
If tips are very thin in your scale, consider 4 walls or ironing top surfaces for crisper highlights.
Light post-processing (wet sanding + metallic paint / Rub ’n Buff) can deliver a cast-metal look.
☕ Support & Follow
If you like my designs, follow me — more functional everyday prints are coming soon, including tool organizers, workshop helpers, and printable accessories.
You can buy me a coffee simply by printing and boosting my files — nothing more 😉
Most of my uploads are completely free, so I’ll be truly happy if you decide to reward my work in any way.
If you’re interested in commercial use of this model, please contact me by leaving a comment.
Etiketler
Model Kaynağı
Orijinal Link: Detayları Gör
CC BY