Hello there,

Couldn't find any SL-8 / SL-9 Stock conversion for my G36 GBBR build, so here is my G36's Project - Futuristic CQB/DMR Conversion set. Should fit on most G36s, but built on WE G39 999c IdZ GBB. Won't fit JG's G36 (JG6 series).

• Hardware needed:

1 Glue/Acetone (glueing parts 1 and 2)

2 Bolt and screw with round head (eg. M4/M5 x17 - for silencer to be locked from top)

3 Outter barrel extension, like this one: (135mm) https://gunfire.com/en/products/barrel-extension-for-replica-equipped-with-a-14mm-thread-1152201061.html

• Parts Guide:

Common parts:

G36 Set - 1 - Rail Base

G36 Set - 2 - Rail Main

G36 Set - 3 - Silencer Base (i'd prefer to melt the nut into the part to lock silencer) Short version:

G36 Set - 4a - Rail End Short

G36 Set - 5a - Silencer Short Long Version (DMR):

G36 Set - 4b - Rail End Long

G36 Set - 5b - Silencer Long

(you can use Short silencer depending on inner barrel's lenght - long is for ~509mm) Stock's Parts:

G39 Set - 6 - Stock Conversion

G39 Set - 7 - Cheek riser

Bonus: G36 Set - 8 - Ambi charging handle - right shorter

( Remix of ohman74's charging handle allowing G39 style stock to be folded when fully extended)

Front / Handguard instructions: ( 135mm [M4] outer barrel extension needed)

1. After printing parts no. 1 and 2 glue them together (when printing with ABS/ASA - acetone will do just fine) - protruding flat parts will provide more glueing surface
2. Screw on the 14ccw silencer base on the extension and slide the silencer on (make sure which side is Up / Top) , then mark a place where bolt will be melt into, take silencer out, melt the bolt into (not all the way in, just to bolt be top-to-top with silencer base)
3. Push-in selected rail end (Short/Long variant) - this should be push-fit.
4. Push-in selected silencer and lock it with screw from top

SL-8 alike for G39 Style stock Instruction:

1. Take off the back part of the stock by rising stock setting lever (or however You call it)

Comments:

1. Make sure you printer will fit all the parts (biggest part is part no. 6 Stock conversion)

Update 08.02.2022:

Combining all previous and recent projects into one named as conversion set

Update 12.12.2021:

Uploaded new futuristic version

Uploaded modified-longer version of Chloviss's silencer (so i can hide all my internal barrel in combo of external barrel extension)

Update 22.05.2023:
Sharing hanguard as F3D ( Fusion360 File ) via google drive as file is about 60MB. Feel free to remix it but don't forget to share remix :)

Category: Sport & Outdoors