MK3S MultiColor LCD Cover with a killer reboot button

Print instructions

SUPER IMPORTANT:

If you want to use this on your printer, please read this first all the way:

1) See Prusa assembly manual how to remove the original cover
2) Use the 4 old screws for the LCD (do not overtighten!) and 2 screws for the (optional) mounting to the frame (optional = risky, read more below)
3) See the pics, very narrow gap between the bed frame and the LCD cover surface
4) Also a narrow gap between the heatbed and any high styled knob you have.

TEST THESE GAPS BEFORE YOU START PRINTING AFTER INSTALL !!!

(make sure you push the cover clips all the way in the frame)

5) option to use 2 screws on the back to secure the LCD cover to the frame. It prevents the cover from lifting up during print vibration. (center the cover to find the holes)

You must also note that the gaps might get smaller in time if vibration moves the LCD cover or selector wheel. So please secure it with screws on the back or your heatbed might crash on the cover.

(I am not going to, I will just lift it off the frame on long prints, because of vibration noise will be there anyway :)

Split the model & color the text as you want, same with the dust cover. Happy slicing!

Original at thingiverse:
https://www.thingiverse.com/thing:3908822