This is a print-in-place folding table for all your folding table needs.  Perfect as a plant stand, doll table, food display, or anything else you might want a small folding table for.  When not in use, the table legs can fold away for easy storage.

Features

• Easy to add images to the top of the table for any event or holiday.
• Legs lock in the closed position with clips.
• Three table tops available: Solid, mesh, and Christmas tree.
• Optionally, you can add 8 6mm x 6mm magnets to lock the legs in the upright position.
  • The magnets are press-fit and can be removed using a small Allen wrench to pry the magnets out.

Additional Parts (Optional)

Printing

I would suggest printing in PLA+ for the added strength but it should work with regular PLA.  Don't print in PETG, the tolerances are too tight and PETG is too strong for the print-in-place hinge to function.

These values need to be set so that the print-in-place hinge is strong enough:

• Vertical Shell Perimeters = 5
• Horizontal Shells Solid Layer Top = 6
• Horizontal Shells Solid Layer Bottom = 5

Setting a filament change at 3.2mm allows you to have a different color table top than the legs.

Assembly

• Apply a sideways force to the end of each leg to break the leg free. 
• Rotate the leg to a vertical position.
• OPTIONAL 
  • Insert the 6mm x 6mm round magnets into the slots in the hinge.  
  • Ensure that the magnets attract each other
  • Magnets are press fit and can be removed if desired by using an Allen wrench