For my Durst M605 colour enlarger I needed an adapter to attach a camera to the column and thus be able to use the enlarger as a very accurate repro stand. Unfortunately, the existing solution for the M670 from oet does not fit, and I also find it quite difficult to print. So I constructed a new adapter from scratch that uses their camera mount, so that if you own both enlargers - which is quite pointless but nevertheless possible - you can continue to use them. The adapter itself follows simple shapes and can be printed without supports. For the attachment to the boom you need a M8x30mm hexagon screw and the star knob from samyp.

For the mounting of the adapter and the camera holder you still need

1x M8x30mm hex bolt and a M8 hex nut
2x M6 x25 nuts and countersunk screw
1x M4 x 30 nut and screw
1x 1/4" screw

Updates

2022/11/28:

• Slightly changed dimensions (depth of the groove for the nuts)
• Alignment of the adapter on the column facilitated by added indicator arrow

Prusa

I3 MK3S

No

No

0,2mm

25%

Thanks to

• oet
• samyp
• Rukey