Remixed this fang cooler to add an integrated e3d v6 cooler clip. The clip has little indexes in it so it doesn't shift around. It also has holes for a zip tie if you think you need it. The e3d cooler fan is the stock 30mm size. The parts cooler fan is 40mm. I shrunk the size of the holes for the parts cooler fan to 2mm to accept smaller diameter screws and so it could be drilled out if you have larger diameter screws. The originals were way to big for the metric screws I have salvaged off my printer. This cooler rocks. With plenty of cooling as you can see in the picture with the 40mm fan I run, I have run PETG out to 150mm/s. Enjoy!

Monoprice

Maker Select

No

Yes

.2

20%

Sliced with CURA.
Tree supports for extreme overhangs.
Hotend = 250c
Bed = 70c
Glass bed with glue stick
Print speed = 30mm/s (my printer would have printed much faster but I wanted to make the part nice.) Supports may not be needed but I didn't want to take that chance.

I run a lot of fan with this PETG for better print quality. I hope you find this remix useful.