Summary

Wemos D1 mini (ESP8266)
This is a revised version of the WemosD1 case.
As the new Type C based connector boards of Wemos D1 mini are getting popular I decided to alter my original case in order to offer the choice to use it with both "flavors" of connector.
The board is sliding in and the back cover should be screwed with two M3 screws.

The original idea of this design of this was to have a reference case that it should embedded on many project cases by remixing it as it was designed to slide fit the board firmly and there are cable/pinout rails to connect the ESP8266 based board with the rest of the project electronics.

This was a part of my HUGE LED project (https://www.thingiverse.com/thing:5171382) where a Wemos device was used.

There are three STL files available. One case for each type of connector and one common back cover.

Print as provided (do not rotate).
No supports needed