Summary

This is a waterproof case for the Raspberry Pi Camera. It's been laser cut out of 3mm acrylic and it can be bolted down to another surface, or 3D print out an attachment plate that will fit a 1/4" nut, so that common tripods can be used to mount the camera case.

You can also this 3D printable stand: http://www.thingiverse.com/thing:1460181

There is a hole in the front to allow my RPi lens adjustment wrench to adjust the lens to the desired focal distance: http://www.thingiverse.com/thing:1574661

I used a clean 22mm x 22mm x 0.15mm microscope cover slip to cover the lens adjustment hole

The entire acrylic case was tack glued together using acrylic glue, then as a double waterproofing, I used clear aquarium silastic to cover the joins.

You can find a sun/weather shade for the case here: http://www.thingiverse.com/thing:1756269

This has been tested during many a winter storm.