this was done on an ender 5+
this was printed standing upright ( butt plate down )

this stock was designed just for something to prove I could do it and work as a functional stock, works with standard lower and buffer tube as long as square at the bottom works with dimension's, the bolts for the handle does work. the small hole for the rod in the selector switch will need to be drilled after printed. some sanding for the inside of tube may be needed. for inserts on the handle i simply took a Dremel and cleaned up the bottom part of each hexagon so the inserts fit better glue was used on all inserts.

nozzle: 0.6
layer height: 0.3
SUPPORTS : NONE
walls: 4-5

Creality

No

No

200

45+