Simple snapfit case for V1.4 for arananet's TzxDuino project.

https://github.com/arananet/TzxDuino-Reloaded

You may need to tweak the screen cutout size and position depending on which OLED you use. I used the "new" style 0.96" one you find in stores on AliExpress.

The four 6mm tall M2.5 standoff are used to space the screen from the board before you solder it in. Secure the screen to the standoffs with M2.5x5mm screws. You can also use a standard nylon standoff if you don't want to print and thread your own.

DesignSpark file and the STEP file I used to model this around are in my repo

https://github.com/djtersteegc/tzxduino-reloaded-v1.4-enclosure

No

0.2mm

20%

Print the case body face down, nothing should need supports.