Summary

This was built for (and tested with) multiple "Explorer" models of Camp Chef grills. It may or may not fit other Camp Chef models.

Camp Chef Table Adjustable Feet
Instructions

1.) Use a long metal rod to pop out the existing leg caps on each leg. Just ram the rod down the open end of the tube and punch out the caps.
2.) Insert one of the Threaded Nut Caps into the same end of the leg that had the cap.
a. Do not attempt to insert/hammer the threaded nut cap with the Bolt screwed in.
You will get better results by hammering the nut in on its own
b. The Beveled end of the Nut should go into the Leg first.
c. Use a Rubber or Wooden Mallet to hammer the Nut into the Leg until fully
seated.
3.) Screw in the Threaded Bolt into the Nut Cap
4.) Repeat for the other 3 Legs
5.) Do not lubricate the threads. You want each of the feet to be slightly stiff so that they will hold whatever height you set them at from the tension.