In my never ending search for things to print to add to my printer I needed a case/mount for my Pi Cam. This was quite difficult as I could not find anything pre-made (like how there are millions of things for the Ender3). I had to combine 3 different things from Thingiverse to be able to do this. In addition to using 3 different things, I had to modify a couple of the pieces (more detail below). For the individual parts I left the original names the same. I want the original creators to get the credit for what they built. Below are the links to each thing I used and the parts from each thing that was used.

Cam Mount parts Used

• https://www.thingiverse.com/thing:4550801

  • Back_Plate_Arm_Connection_v3.stl
  • Pi_Camera_case_back_with_IR_LED_Scaled_v4.stl (Modified with openings for Heat Sinks)
  • Pi_Camera_case_Front_with_IR_LED_V1_v4.stl
  • Rotation_Arm_v3 (cut off the 3x connector to modify BIQU_BX_Base.stl)

• https://www.thingiverse.com/thing:4887351

  • BIQU_BX_Base.stl (Modified with Rotation_Arm_v3)
• https://www.thingiverse.com/thing:3780585/files
  • Extension_arm.stl (had error, fixed in Microsof 3D Builder)

The Pi Cam Parts

• Raspberry pi Camera Day & Night Vision, IR-Cut Video Camera 1080p HD Webcam 5MP

  • https://www.amazon.com/gp/product/B07R4JH2ZV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

• GeeekPi Raspberry Pi 4 Heatsink, 20PCS Raspberry Pi Aluminum Heatsinks with Thermal Conductive Adhesive Tape

  • https://www.amazon.com/gp/product/B07R4JH2ZV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

• Longer ribbon cable to allow for the height of your Z-Axis

  • https://www.amazon.com/gp/product/B07R4JH2ZV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 (search link, choose the one that is best for your printer)
• M3 Screws and bolts
  • 6x M3 screws (US 4-40)
  • 10x M3 bolts (US 4-40)

I would also like to thank Aaron Shour who I met on one of the Facebook 3D groups for first modifying the clamp that attaches to the printer, and helped me through some printing issues.

OUYZGIA Twotrees Tornado 3D Printers Big Size

No

Yes

0.2

20%

Assemble as shown. I added a bolt between the case back and back plate to allow for the heat sinks that stick out a little from the case back.

• First I needed a part that connected to my printer, I used the BIQU_BX_Base.stl but the rest of the parts from this thing did not work for the Pi Cam I had. So I cut off the 3x connector part of Rotation_Arm_v3 and replaced the connector on BIQU_BX_Base.stl.
• I modified Pi_Camera_case_back_with_IR_LED_Scaled_v4.stl out of necessity. The first Pi Cam I got the IR blasters over heated and stopped working. So, I made openings in the back to allow for heat sinks.