Thread organizer for weaving friendship bracelets. Inspired by my daughters both wanting to user our single "My Friendship Bracelet Maker" (http://myfbm.com) at the same time.

Combine with a board, screw hook and three wood screws to create a bracelet making platform.

The included .stl file is sized and positioned ready to print.

Mount the print on a board using 3 wood screws and add a screw hook to hold the thread.

The board I used is 14 x 7 x 3/4 inches. The print is attached with 1/2 inch wood screws. the screw hook is plastic coated. The distance between the screw hook and the pegs is ~ 9 inches. I drilled several holes for the screw hook so my daughters can reposition it easily.

Peg spacing is important. The threads need to fit between the pegs without hanging too loosely.

If the peg spacing on the included .stl file does not work with your printer/printer settings, download the .scad file and experiment with the gap variable. On my printer, a gap of 0.039 gave the best results. The gaps were too tight with a setting of 0.0385 and too large with a setting of 0.04.