Filament Straightener
Wilma Buckley
AI ile Benzer Model Bul
Baskı Profili(0)
Model Dosyası(0)
1
1
0
Yayınlandı:2016-11-14 20:24:50
0
0
110Açıklama
Etiketler
Model Kaynağı
Yorumlar(0)
Summary
This is a customizable filament straightener for when you have tightly wound filament spools. This should help to straighten out highly bent 3D printer filament spools.
This part can be customized to suit different bearings and fasteners that you may have available. Make sure to accurately measure the bearings and fasteners that you intend to use.
Bill of Materials
3x 5/16-18 1.5" Screws (~7.9mm)
3x 5/16-18 Nuts
3x 608 bearings (OD22mmxID8mmxT7mm)
3x5/16" washers (currently not show but I suggest that washers are added)
Print Settings
Printer Brand:
RepRap
Printer:
MakerFarm i3V 10
Supports:
Yes
Resolution:
0.25mm or less
Infill:
20-25%
Notes:
You will need to print with supports. Otherwise the screw heads may not sit flush with the bottom of the filament guide body.
Etiketler
Model Kaynağı
Orijinal Link: Detayları Gör
CC BY