This is a remix of the " Electric Candle Adapter" by user Pliind.
This has been modified to fit a standard 1/8-IP or 3/8-27 electric lamp stem. I used this to retrofit a 120v electric Chandelier. This was intended to fit a specific 6-peice battery operated candle set purchased from Amazon.

The original design created by Pliind was the only design close enough to fit the 0.8 inch AA battery candle set. The candles had a silicone sleeve for the base that I did not use.

Change log from Pliind.

• Cut off 0.7 inch from from bottom.
• added 0.4 inch hole for mounting
• Lengthend overall by about 0.25 inches
• Added thicker exterior walls for added strength. (resolution was not set correctly so it is 20-sided and not circular - email me for the tinkercad link)

Images are of final assembly

Amazon Links - TBD

• 50 PC 1/8-IP or 3/8-27 lamp Nut
  https://www.amazon.com/gp/product/B07DF7GWMC/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
• 6-Peice AA battery candle set
  TBD

Anycubic

i3 Mega S/Pro

No

No

30%

Printing 1 left a lot a of interior lateral supports to cut away. When printed in 2 or 4 qty batches, left less supports to cut away. I used Cura for slicing. You results may vary

Original file modified in TinkerCad