Multipurpose mount for Boscam FR632 Diversity Receiver.

Has attachment point for "GoPro" style mount, hole that can be direct threaded with a 1/4-20 screw, and a quick-release shoe for a tripod.

The 1/4-20 hole is a little small so it takes some force to get the screw started, but that way it will be a better fit. You could also try tapping the hole if you prefer.

The tripod quick-release shoe was made for the Sunpak Platinum Plus tripod, but may fit others.

GoPro mount part came from here.

Works with PLA or ABS. Check the instructions tab for printing details.

Update: Added new stl file with proper orientation. The only difference between the two is the orientation of the object.

Model files available here. Lots of export formats to choose from if you want to modify it.

Print with the receiver bottom (face with cable holes) down. The tripod shoe should be at a 45 degree angle to the bed.

Prints without supports.

I recommend a brim to make sure the first layer of the tripod shoe doesn't separate.

Any wall thickness around 1mm and top/bottom thickness over .5mm should be fine. (2-3 shells and 3-4 top/bottom layers)

For my prints I used the following settings:
Layer height: 0.2 mm
Shell thickness: 1.2 mm
Bottom/Top thickness: 0.6 mm
Fill Density: 15%