NEMA Stepper OpenBeam adapters
paprikalever
AI ile Benzer Model Bul
Baskı Profili(0)
Model Dosyası(0)
0
0
0
Yayınlandı:2016-04-26 17:43:27
0
0
000Açıklama
Etiketler
Model Kaynağı
Yorumlar(0)
Summary
A couple of quick adapters to mount NEMA 11 and NEMA 17 stepper motors on 15mm OpenBeam rails. On the bottom are alignment bumps to align the steppers at 0°, 45° and 90°. The mounting specifications for both motors was obtained from the web.
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator Z18
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.2mm
Infill:
20
Notes:
Supports are only necessary for the NEMA mounting holes, if you have good bridging with your printer you may be able to skip.
Post-Printing
Mounting screws
Used 2.5mm mounting screws on the NEMA 11, the NEMA 17 required 3mm screws.
Etiketler
Model Kaynağı
Orijinal Link: Detayları Gör
CC BY