Cute kitten
KA3ILAR
AI ile Benzer Model Bul
Baskı Profili(0)
Model Dosyası(0)
0
0
0
Yayınlandı:2026-06-23 10:01:50
0
0
000Açıklama
Etiketler
Model Kaynağı
Yorumlar(0)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.6mm
Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA Smart Recycled Red Transmission Distance: 4.4
PLA Smart Recycled Orange Transmission Distance: 5.7
PLA Smart Recycled Yellow Transmission Distance: 9.3
PLA Smart Recycled Blue Transmission Distance: 2.2
PLA Smart Recycled Green Transmission Distance: 6.5
PLA PolyLite White Transmission Distance: 5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to Orange
At layer #16 (1.36mm) swap to Yellow
At layer #20 (1.68mm) swap to Blue
At layer #23 (1.92mm) swap to Green
At layer #25 (2.08mm) swap to White for the rest.
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.6mm
Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA Smart Recycled Red Transmission Distance: 4.4
PLA Smart Recycled Orange Transmission Distance: 5.7
PLA Smart Recycled Yellow Transmission Distance: 9.3
PLA Smart Recycled Blue Transmission Distance: 2.2
PLA Smart Recycled Green Transmission Distance: 6.5
PLA PolyLite White Transmission Distance: 5
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to Orange
At layer #16 (1.36mm) swap to Yellow
At layer #20 (1.68mm) swap to Blue
At layer #23 (1.92mm) swap to Green
At layer #25 (2.08mm) swap to White for the rest.
Etiketler
Model Kaynağı
Orijinal Link: Detayları Gör
CC BY