C-Clip pliers
daringtower
AI ile Benzer Model Bul
Baskı Profili(0)
Model Dosyası(0)
0
0
0
Yayınlandı:2026-08-10 03:27:53
0
0
000Açıklama
Model Kaynağı
Yorumlar(0)
Pliers for removing C clips.
Printed in PETG with 5 perimeters and 50% infill.
Hardware needed: M5 bolt and nylock nut and two pieces of 2mm steel rod (I used an old bicycle spoke). The holes for the rods are a tight tolerance and may have to be drilled out and the pins hammered in.
Model Kaynağı
Orijinal Link: Detayları Gör
CC BY-SA