Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 63x94.5mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA BambuLab Black Transmission Distance: 0.3

PLA BambuLab Basic Red Transmission Distance: 4

PLA BambuLab White Transmission Distance: 5

This print uses 3 unique filaments

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Red

At layer #12 (1.04mm) swap to White for the rest.

If using a 3d printer without multicolor abilities, instead of color change at each specified layer, enter M600 for G-code at that layer to manually pause and swap color filament.