High-detail 3D relief model inspired by Gohan Beast from Dragon Ball Super, optimized for FDM 3D printing. The design uses layered depth to enhance contrast and bring out fine manga-style details even at smaller scales.

The model is easy to print with standard PLA settings and does not require supports. It can be printed in single color or multi-color (AMS compatible) for enhanced visual impact, especially for the eyes.

Fully scalable to fit different display sizes, making it perfect as wall art or desk decoration. The geometry is optimized to balance detail and print time, ensuring a clean result even on entry-level printers.

Printing instructions:

Project: Gohan Beast.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 162.47x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.99998mm

Filaments Used:
    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #ddd7c7 PLA+ Esun Bone White  Transmission Distance: 5
    #000000 PLA+ IIID Max Black  Transmission Distance: 0.5
    #ffffff PLA+ IIID Max Xtreme White  Transmission Distance: 2.8
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Bone White
    At layer #10 (0.88mm) swap to Black
    At layer #11 (0.96mm) swap to Xtreme White for the rest.