Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.9mm and the Actual Depth is 2.7mm

Filaments Used:
    PLA PolyLite Black Transmission Distance: 0.3
    PLA+ IIID Max Navy Blue Transmission Distance: 3.6
    PLA+ Esun Magenta Transmission Distance: 4.5
    PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Navy Blue
    At layer #10 (0.88mm) swap to Magenta
    At layer #17 (1.44mm) swap to White for the rest.