Summary

I needed a bracket to mount a 12V lighter socket in my solar garden shed. This bracket can be screwed to a flat surface and then the lighter socket fit into the hole. This is on contrast to mounting the socket into a panel, where you need access to the back side of the panel to hook up the wires.

Print Settings

Printer Brand:

Type A Machines

                                            Printer:                      
Type A Machines 2015 Series 1
                                                                                Rafts:                      
No
                                                                                Supports:                      
No
                                                                                Resolution:                      
0.2mm
                                                                                Infill:                      
20%, or 3D infill @ 2mm spacing

Post-Printing

You may need to clean out the large hole with a deburring tool to fit your lighter socket. You also have the option of only enlarging part of the hole if your socket has flats on the sides and you want it to fit those.

How I Designed This

Autodesk Fusion 360. YouTube video with the design process below:
https://youtu.be/IRPB8AZ9rxA

Etiketler

12v.Çerçeve.

Model Kaynağı

Orijinal Link: Detayları Gör

CC BY