Project: bart.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 112.5x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.9mm and the Actual Depth is 1.7mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.88mm) swap to Marine Blue
    At layer #12 (1.12mm) swap to Jade White
    At layer #13 (1.2mm) swap to Yellow for the rest.