Not my work

COPIED from   https://www.crealitycloud.com/flowprint/model-detail/halloween-spooky-spider-fridge-magnet?source=4&profileId=691b5423ad9806c8e4677961

Spooky spider fridge magnet

If you like it --> press like it :-)

Here is a model of the famous spider model from Jason C Kessler. I've added two sockets for 5x3mm magnets. Just pause the print at the top of the installation space (check your slicer for the layer number or height beforehand), install the magnets, and resume the print. The black one had a print time of only one hour!

There is only 0.2mm at the bottom, so the holding force will be good. You can see the magnets in the pictures because it's transparent blue PETG.

 If the overhang of the feet causes no problems on your printer, you should only need supports for the teeth now → this relates to Spider_magnet

I've printed the black one with only a brim on my stock CR-10 V2!

If you scale it to 200%, you can use 10x5 magnets, or 300% to use 15x8 magnets, but this is untested. At the shared model size, it works perfectly with the force of my N50 grade magnets.

It looks cool, and you can also use it for Halloween to scare your wife, husband, kids, or friends ;-)

Just put it on your fridge, the car door, or somewhere else and be happy...

Would be happy to see your makes!