Made for keychain and/or Tabletop display

Printed using ESun PLA+ Green and Black @195°C, 200mm/s print speed and 0.2 layer height. Tank may need supports, snug default. Default print orientation will be its front facing upwards. Super glue is required as well Raw un-melted filament for the Cannon. Pls leave a like and follow if you like the design!

Quick steps for installation:

1. Prepare Cannon using colour of choice using Raw un-melted filament. Use a heater or lighter to bend it straight if needed.

2. Check can all parts fit before using glue (Cannon slot is the most problematic)

3. Glue the Tracks, check for left and right tracks before gluing. (T1 & T2)

4. Connect the 2 connector parts as 1. (C1 & C2. Keychain ver. does not have these parts)

5. Glue the Turret connector 1st followed by the Hull. Use a small amount of glue and apply it the small notches not the entire ring.

6. lastly the cannon, drip a small amount of glue in and simply slot in the cannon slot. That's the tank done.

7. For keychain ver. you need to get those key ring with the self taping screws. simply screwing it from the top work and remember to add super glue so it stays.

Physical Purchases

As per normal those who are keen on making your own ones, the files are free and for those who wants to 3D print them but if u cant print them. If you wish to get one for yourself its 5USD for one, excluding Shipping, reach me out via email @senshavor@gmail.com

Join my Discord for updates!!
https://discord.com/invite/EEyxYN5ZUM

If you want support me here the link to my PayPal, its also the mode of payment for purchases. Thank you!
https://paypal.me/SenshaVor