If you're experiencing unstable pedal feel and poor braking response due to the springs, you can try this solution.

NOTE: I used 80A polyurethane springs; using spacers would have given the same result.

*If you want more flex, use 70A or 65A.

*If you prefer no flex and find the original elastomer sufficient, then use spacers instead.

The components were printed with 80% infill and PETG material.

HOW TO CUT ELASTOMER: https://youtube.com/shorts/kIgbBYlurDc

HOW TO INSTALL: https://youtu.be/mCGXscjP2as