German Shepard - HueForge
Jet Stamp
AI ile Benzer Model Bul
Baskı Profili(0)
Model Dosyası(0)
0
1
0
Yayınlandı:2025-12-17 12:32:54
1
0
010Açıklama
Etiketler
Model Kaynağı
Yorumlar(0)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.23997mm
Filaments Used:
#000000 PLA+ Sunlu Black Transmission Distance: 0.6
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#ff8000 PLA+ Sunlu Orange Transmission Distance: 5
#ffffff PLA+ Sunlu White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Red
At layer #12 (1.04mm) swap to Blue Gray
At layer #18 (1.52mm) swap to Orange
At layer #23 (1.92mm) swap to White for the rest.
Scaling Instructions
Resize as needed, but remember to reset the Z-axis to 100% before printing .
The .3mf file with black picture is with PAUSE, inserted for manual change of the filament.
The .3mf file with green picture is with auto filament change, for the CFS.
Etiketler
Model Kaynağı
Orijinal Link: Detayları Gör
CC BY-SA