Key features

• Perfect integration of the DJI O4 Lite Air Unit camera

• Compatible with O3 lens mods (Khrom’s mod), and O4 Wide lens mods from Flywoo/Runcam

• Wide-X geometry

• Excellent flight performance, easy to tune

• Strong and stiff

• Frame, standoffs and props are invisible in the video feed

• Camera tilt options : 20, 25, 30 and 35°

• Spacious Stack height (19mm)

• Designed to be house a full sized ESC and Flight Controller.

• Easy to build, ideal for beginners

• LiPo strap slots - Mount your LiPo in Traditional way or Toilet Tank.

• Open source, of course

Check out the build video here: DKZ FPV

Presentation

It's all because in my area - there's no spacious park or bando to fly, hence this frame created.
I've been in love with the JeNo Fit 5" since I built it months ago, so the only thing that make sense to me is to shrink down the 5 inch version into a 3.5 inch.

At first I don't have any expectation since this only for my "side-quest" freestyle rig - But oh boy I was wrong...very wrong...
With the help of members of the WE are FPV community (Jerome & Nochamo) - we've been able to make this frame comes to live.
Even tough this frame is mainly designed by me, but I've always keep it stick to most of the previous JeNo philosophy, Which is: 

• High performance and durability

• Completely clear video feed, with no frame or props in view (3.5" size and under)

• Spacious and easy to build

• Open source

Huge thanks to Jerome & Nochamo for their feedback, opinion, and sharing the experience. Once again, this shows the benefits of open source, where everyone gets to benefit.

Detailed specifications

The Arm is designed to give protection as much as it can (up to 1804 motor size) without using any gigantic TPU arm guard that cover the arm ends & the motor bell.

Side look of the deck using Sequre H743 & Blueson A1 ESC - Yes that's a full size stack and Yes, it's overkill.

Front cage look - protect the camera & filter at all cost without any 3D print or Prop visible in the googles feed & DVR.

The Onboard Recording DJI O4 Lite with O3 Lens Mod + Flywoo Naked O3 Filter (4K 600 FPS) Result:

Bill of materials

In addition to the carbon fiber, you will need the following hardware to complete the assembly of the frame.

Stack materials

• If 25.5x25.5 AiO

• If 20x20 stack

Frame materials

Additional materials

Fasten the lipos

The JeNo allows the use of non-slip straps thanks to its strap slots. You can also use a LiPo pad if desired.

Blackbox

Here is an overview of vibration distribution on the 3 axes for the JeNo FS35 with Rabbit Arm. This is indeed the unfiltered gyro signal freestyle flight :

Authors

The JeNo was designed by :

• nochamo - Youtube

• Jerome / Jéjé FPV - Youtube

• Dyka / DKZ FPV - Youtube