cool, easy to print, nice looking and really comfortable capsule holder that is mounted to the side of the coffee maker in two ways - in built magnet or two sided tape.
 
i recommed to print:
layer height - 0.2mm
with a brim - width: 20; distance: 0
wall loops - 2
infill - 8%
kinda low to medium speed.

if you use magnets pause at leyer 508 or in the area depends on your settings and insert in each of the 3 'boxes' a circle magnet of height of 1.6mm and diameter of 19.5 - 20mm.

i like the transperent fillament.


please share your result ;)