Car wheel coasters - 4 quick-printed coasters with a size of 100 mm. It's easy to find adhesive cork backingLinkThe coasters

Print face down to achieve a textured effect, or you can use ironing

Details:

• Filament → Black PLA and gold satin PLA were used
• Setting the nozzle to 0.4, with a layer height of 0.2 and an initial layer height of 0.22
• 2-story outer wall
• Bottom surface pattern = concentric circles, 5-layer bottom shell
• 15% backfilling, using a helical surface to fill the space
• Reduce the speed of the outer wall: outer wall = 100 mm/s, inner wall = 225 mm/s

Under my settings, the face-down mode results in about 75 grams of black filament and about 7 grams of gold filament