PLA support for Siemens MV440 camera. The stand has a base of 100mmX100mm and a height of 215mm. The camera lens will be at a height of 70mm from the base.
Each of the pieces took around 21 hours to produce.
The layout of the parts was built in Fusion360 and I used PrusaSlicer for printing.
Other print settings:

• Speed ​​50mm/s
• bed temperature 65º
  Nozzle temperature 220º
• Brim type: Outer brim only
  Infill: 15%
• Material: PLA, black