Gridfinity Screw Measuring Ruler (1x2 Storage Compartment)

This is a simple but crucial tool for your Gridfinity setup. All you need to do is place the screw in the V-shaped groove, and you can quickly measure its length (M3, M4, M5, and up to M12).

Features:
Gridfinity Standards:Suitable for a 1x2 base.
V-shaped groove design: Automatically center the screws for accurate reading.
Compact:It can measure up to 120 mm and doesn't take up too much desktop space.
* **Readability:** High-contrast text design (requires specific printing settings; see below for details).

⚠️ Important Printing Instructions ⚠️
The numbers on this ruler are very small (2 mm high) to accommodate more graduations. To print them clearly with a standard 0.4 mm nozzle, **you must use these slicer settings**:

1.Wall generator:Switch toArachne(It's crucial for variable line widths).
2.Horizontal expansion of the pores:Set it to0.05 millimeters。 (This can prevent the small loops in "0", "6", and "8" from closing.)
3.Top surface speed:Reduce the top-level speed to20 millimeters per second。
4. Print thin walls: already selected/enabled.

If you don't use these settings, the text might appear blurry or hard to read.

Post-processing
To ensure the best readability, I recommend usingWhite paint penOr fill in the numbers with crayons and then erase the excess parts.

Wish you a pleasant printing experience!