This is a modular display stand we designed in order to show off the design progression of our portable fog machine at Open Sauce 2025. You can use it as a single display with just the start cap and end cap, or you can add as many middle extensions as you want! We also have a middle extension with multiple shelves to show smaller components. 

Printing: You will need a print bed with at least 223mm x 223mm x 102mm of print volume. Infill should be 5-15% depending on how heavy the parts being displayed are. Layer height should be .2mm for best results. 

Assembly: Each section uses three M3x20 screws to secure together. Two on the back, and one in the lower “arch” triangle. 

PS: The fog machine in the picture is design-patented (D 1,069,225). The stand is not.