Shape mod for 2x2 Rubiks cube that makes it look like a Cob of Corn along with a stand for a puzzle that mimics corn husk. Rather large piece of corn (approx 11 inches tall and 3.5 wide). You will need to print 10 pieces all together. 4 top quarters, 4 bottom quarters, one stand base, and the stand "big".

Epoxy was used to attach shape mod to cube. Stand could be friction fit but was pla welded with a soldering iron just in case.

Scaling Note:
Corn cube can fit any 2x2 cube as long as you get the scaling right. Some common 2x2 sizes: if your cube is 52mm, keep scaling at 100% for 52mm, 98.07% for 51mm, 96.15% for 50mm, and 94.23% for 49mm. I used a yj yupo 2x2 and I used the 96.15% scale. be sure to scale stand and base with the same scale (i made this mistake)

If you have any more questions, please leave a comment, and I will respond as soon as possible.

Video of how i made it: https://youtu.be/ncjFvkN2yFc?si=uLizgd0jtFiPguHn

Creality

Ender-3 v2

Doesn't Matter

Yes

.2-.4mm

10-20%