Bathroom storage cup with removable dividers and a removable bottom tray for catching water. Holes in the bottom of the cup allow water from toothbrushes to drain into the bottom tray. The two walls are removable and can be configured to be halved, quartered, or with no insert at all.

Printer setting:

The filament pictured is Overture Rock White PLA.

Infill - 10%

Nozzle Temp - 210C

Bed Temperature - 60C

Support - Only for the cup, this supports the overhanging ripple on the outside. I set the angle threshold to 80deg to avoid support being added to the inside groove for dividers.

Layer Height - 0.2mm

Assembly - The dividing walls slide together and then slide into the cup. I recommend using some light sandpaper on the contacting edges to allow them to slide into place more easily. The cup does not attach to the base, it simply sits on top of it.