I decided to make a keychain using the tools from MakerLab.

I hope you all like it and feel free to print it out for use in entrepreneurial activities at exhibitions or fairs.

1. I used the following features:
2. 10 layers or a height of 2.4 mm, with a layer thickness of 0.2 mm. You can use any settings you want.
3. 10% filler
4. 4 layers for the top and bottom layers. If your consumables are light in color or there are transition issues, I recommend using 5 layers.
5. I've added a Bambu Lab A1 file that includes the complete print board for easy use. I hope this configuration file will be useful to you.
6. I reduced the printing speed by 20% compared to the default speed in the slicer, and set the first layer speed to 40 mm/s.

I suggest flipping the design so that the colored side is smooth and has a better surface effect.

For the key ring, I suggest using one with a diameter of 10 mm.

I hope you like this design and can support me by liking it and showing your printed works in the comments. This will help me create more designs.