A case to hold RPi Zero, PiCamera (in my case NoIR version) and the Pimoroni HyperPixel display.NOTE: For the old 3.5" version!! I don't have the new display to test with so you will have to import the Fusion360 design (see link below or in thing files) and adjust parameters.

Cut a small square of the "superblue" filter that comes with the NoIR camera and dropped to the hole that holds the camera in place.

The Micro-HDMI -> HDMI adapter provider friction-fit to hold stuff in place when lid is not there.

v2 lid has thinner top (the part that covers the non-viewable area of the display), I did not test-print that, just figured after printing the first one that it might be a good idea.

See examples for using the camera and stuff in https://github.com/rambo/picamera_stuff

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

0.2

Infill:

Notes:

Fast settings Printed on NGen but anything should work, If you have super-well tuned printer maybe the bridges don't need supports.

How I Designed This

Looked up the footprint for RPi zero to get accurate hole positions without messing about too much.

Rest is just measured things with calipers and then modeled a simple case in Fusion 360 (Download design files from https://a360.co/2HnaCGS).

Category: Computer