Steelseries Arctis 7 power button.

I will be updating with a more accurate version when I can, but with a little bit of trimming this one works and is currently installed in my arctis 7 headphones.

The LED light does shine through the power symbol on the button.

Steps for repair:

• Remove the foam cover
• Unscrewing 3 screws holding the speaker to the housing
• Removing the speaker plate from the housing to expose the battery / circuit board.
• Unscrew the 3 screws holding the circuit board in place
• Use a flathead or tweezers to remove the glue from / pop out the broken power button
• Install new part and re-assemble