Printing Tips

• Please print this with supports, Mandatory!! (Please make sure, your interface Top Z and Bottom Z distance are calibrated correctly, for easy removal)

• The tolerance for the connector/joint between the butt and the actual key is approximately 0.3mm, if your printer has a very tight tolerance spec, expect to use some glue.

  • If your printer can't handle the tolerance, I have decided on, feel free to scale the model up.

• This print takes approximately 10gm (Supports included)

This is just a cool key, I made for fun.

Feel free to remix this with whatever keys you have, and I'd appreciate if you dm'ed me your creation. Thanks