Allows to lift your Audi with a floor jack. Bottom part interfaces Craftsman jack; universal version included. Two heights: 20mm and 50mm to help lifting Q-models. 

Tested on Q7, printed in PETG, but any plastic should do.

Print with 100% infill. Orient with the top part on the print bed, enable supports.

CAD files:

20mm universal:

https://cad.onshape.com/documents/7d0fce4888115f9c02503682/w/e615a1b492e63eead1152751/e/88fbcaabcad95ed5e2edf5eb?renderMode=0&rightPanel=appearancePanel&uiState=64bf35c0a28e9666127ad67f

20mm for Craftsman jacks:

https://cad.onshape.com/documents/7d0fce4888115f9c02503682/v/c722bbeb3c0c2d4237f13db3/e/88fbcaabcad95ed5e2edf5eb?renderMode=0&uiState=64bf3613a28e9666127ad6da

50mm for Craftsman jacks:

https://cad.onshape.com/documents/7d0fce4888115f9c02503682/w/7af13ab032cbd88572bc1e2f/e/88fbcaabcad95ed5e2edf5eb?renderMode=0&uiState=64bf29129bb4db525b59e9be