This is the Nuka Cola bottle from fallout. It's based off one of the concept art posters rather than the in game version.

I have included everything i have made so far and a blank label and cap that can be customized however you like.

I have done a test print of the bottle in vase mode at 0.2 layer height and it works fine. The cap is printed at 0.2 layer height with no supports. Still to print the label but hopefully it'll be fine printing horizontally as there will be less filament changes for multi material than doing one vertically.

Multi colour parts are included for use with multi material printers.

Updated 22/1/19: Modified neck of bottle to allow easier printing of top rib

Updated 23/1/19: Made another label closer to the one on the concept art, included the old first version of the bottle without the added chamfer on the top rib, this is fine if your using an infill.

Updated 12/02/19: Added photo of finished bottles. A quirk when printing the label on its own in slic3r with multi material is that the wipe tower doesn't start right on the bed so print label and cap at the same time and it works fine.