Galactus Bust – Display Model

This Galactus bust is a detailed display model designed for 3D printing and post-processing. Strong armor lines, clean facial detail, and a bold helmet profile make it a great shelf piece or painting project.

⚠️ Supports required
Supports are required around the helmet, face, and armor overhangs.

Print Settings Used

• Printers: Creality K1C and K2 Plus
• Material: PLA / PLA+
• Infill: Gyroid 8–10% (use lower % for smaller prints, higher % for larger scales)
• Supports: Yes (file includes normal supports — adjust to your preference)
• Top Z Interface Distance (supports): 0.25 mm
• Orientation: As provided
• Layer Height: 0.2 mm recommended

Finishing Tips

• Best printed in white for painting
• Face details work well with acrylic paint or acrylic paint markers
• Remove supports carefully around the face and helmet for best results
• Light sanding before paint improves final appearance

Remixes

🔧 Remixes are welcome.
Feel free to modify or improve this model. If you create a remix, please share it.

Credits

• Model generated using Meshi AI
• Prepared, tested, and shared by Grider 3D Creations