Project: pokemon jessie.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 101x160mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA PolyTerra Army Blue Transmission Distance: 0.3
    PLA BambuLab Basic Red Transmission Distance: 5
    PLA BambuLab Matte Lilac Purple Transmission Distance: 2
    PLATBambuLab Matte Mandarin Orange transmission Distance: 3
    PLA BambuLab Basic Beige Transmission Distance: 8
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Army Blue
    At layer #11 (0.96mm) swap to Red
    At layer #19 (1.6mm) swap to Lilac Purple
    At layer #21 (1.76mm) swap to Mandarin Orange
    At layer #23 (1.92mm) swap to Beige
    At layer #25 (2.08mm) swap to Jade White for the rest.