Hello all! This is my first project modeled in cad! This is by far not perfect and could use some refinement but it works and is currently in my vehicle printed in asa. The model comes in 2 parts, one for the phone holder and one for the wireless charger. I made this with the apple magsafe in mind and has a slot to run the cord through behind the dash. It is a very tight fit and required me to do some filing to get it in and force it in. I would suggest if your not comfortable with doing that then wait for a remix that fixes some of the fitment issues. The upper tray screws into the same screws for the ashtray and the lower tray can fit screws though i hot glued them together personally incase the charger slot is not the correct dimension as i have not tested the lower charger slot yet. This model also has a port for the bulb thats wired for the ashtray. If the light is too bright and distracting, you may be able to wire in a stepdown 12v to 5v converter or resistor. THIS IS A WORK IN PROGRESS. I thought it would be a good idea to have a phone holder but not at all experienced with fusion so thought id upload and see what someone could do with it. THANK YOU FOR READING!!!!!!!!