Design, build, upgrade & repair your own headphones.

The speakers, remote, cables, cushions and headband can be bought as a kit on www.print.plus

This page contains the 3D printable files for the headphones design #2

Print instructions

Print settings for frame:
-0.40mm nozzle for high detail & good fit
-print frame separately by itself for best mechanical properties
ensure lines on same layer melt well together (no gaps between lines) as well that layers themself melt well together to ensure good mechanical properties
-0% infill
-1.2mm (minimum) wall thickness
-1mm top &bottom layer (minimum)
-print without support
-print without brim/skirt/raft (mini-brim modeled into 3D model)

Print settings for speakers housings, covers and remote parts:
-0.40mm nozzle for high detail & good fit
speaker housings, covers and remote parts can be printed together
-35% infill (you can play with this amount to see what it does to sound)
-1.2mm wall thickness
-1mm top & bottom layer
-print without support (support modeled into 3D model)
-print without brim/skirt/raft