This Hueforge design showcases the Skull King.

2 files available:

1. Framed version - This comes with a merged border to suit the frame available by clicking the GIF at the bottom.
2. Frameless version - Made slightly thicker for sturdiness to fit on a stand.

Dimensions & print settings:

• 230x184mm Portrait
• 1.68mm Thick - Without border. Frameless version - 2.24mm.
• 0.4 Nozzle
• Layer Height - 0.08mm
• Base layer - 0.24mm
• 100% Infill
• 1 Wall
• 9999 Bottom Layers (personal preference to printing Hueforge)

Filaments Used:

PLA Matte Black TD - 0.1

PLA Bambulab Blue/Grey TD - 3

PLA Bambulab Jade White TD - 5

Instructions FRAMED VERSION:

• Start with Matte Black
• At layer #6 (0.56mm) swap to Blue Gray
• At layer #12 (1.04mm) swap to Jade White for the rest.
• At layer #20 (Framed Version) (1.76mm) swap to border colour - Optional for an angled effect, I opted with black.

Instructions FRAMELESS VERSION:

• Start with Matte Black
• At layer #15 (1.28mm) swap to Blue Gray
• At layer #20 (1.68) swap to Jade White for the rest.

If scaling, please remember to keep the ‘Z’ the same, for this model, Framed: 4mm. Frameless: 2.24mm.

For a hangable easy fit FRAME - Click the GIF

For a small, simple and push together stand - Click the image

-------------------------------------------------------------------------------------------------------------------------------

Feedback, likes and boosts are always appreciated.

Enjoy.