Universal Sound Bar Mount.

There are 3 components to this design:

• TV adapter plate - this has been designed to connect to the generic re-branded TVs that you get from Aldi and JB Hifi etc.  Refer to the photo of the silver TV legs, if your TV came with these, this bracket will work for you.
• Sound Bar Bracket - There are two sizes I have designed - 51mm High x 71mm Wide, and 67mm High x 105mm Wide.
  These will need either a 4mm Ø hot melt insert thread OR a approx 3mm nut and bolt.
• Some shims to make it easier to get it nice and snug.

Note, prior to mounting, test the mount and strength will handle the sound bar.  Use at your own risk.

I recommend printing in ABS or ASA because I have concerns that PETG could deflect to far.  However feel free to let me know if you did it in PETG and it worked.