Summary

The currency of true Chuds.

Print Settings

Printer Brand:

Creality

Printer:

Ender-3 v2

Rafts:

Supports:

Resolution:

.12

Infill:

How I Designed This

Design Process

To make your own similar objects, get a simple picture/drawing you want to use and convert it to an SVG file. I did it with the site convertio.co, but you can probably use any good site like that. After that, upload to Tinkercad and change it from a solid to a hole object. Then place on/in the desired shape of object you want to put the picture in. From there you can customize however you want. I put the lettering on the back and printed. I printed with the writing on the bottom so that the picture on top would be more detailed, and it turned out well.
For resolution, I did the finest I could, which was 0.12, in order to get a good print of the picture. I would imagine you could do a bigger value, but I don't know because I haven't tried it. After printing, it turned out well, but the lines may have been too thin, as there are visible gaps between the walls of the top. I think it might be called "pillowing," so next time I'll see if lowering the layer height to 0.1mm helps.