This is a 3D printable working animating table

What you need:

Any kind of light source that fits in a hole that has a diameter of 41 mm. For example a flash light, a table lamp, an LED circuit or whatever that fits! (The light source I used is a mere table lamp with the shade removed)

The longer screws may need a raft if they don't stick to the print bed, but other than that, no supports or rafts are needed.

Also, the part named "Transparent piece" should be printed in transparent/semi transparent material, so that some light can pass through it. If you don't have that kind of material, a similar part can easily be cut out of a plastic box/container, or anything similar. One of those round candy boxes should be perfect.

Assembly: Insert whatever light source you have into the round hole in the side of the box, and turn the light on.

Place the transparent piece on the box, and screw the top piece on with the long screws. Done!

Using the phone mount:

Screw the two parts of the phone mount together with the remaining screws, and after that, place your phone on it's place, and screw it on with the slab. (The mount should work with any phone with the width being less than 75 mm)

To switch to the phone mount, just unscrew the top piece of the box, and screw the phone mount on instead.

The images provided can help with assembly